motorouterlinks.com

Unless otherwise stated, this website is not related or associated with any third-party brand. Brands, trademarks, logos, and company names are merely used as examples.

Restore A Motorola 2247-N8 Modem to factory default

Restore A Motorola 2247-N8 Modem to factory default

If you have purchased Motorola router to boost the wifi signal then you have made a right decision, but sometimes because of some issues you can face some problems that can prevent your router to work efficiently and you have to reset your device. For restoring your Motorola 2247-N8 modem you need to understand the procedure from the start. This blog will lead you to know the details about the restore and Motorola router reset process.

Formerly starting the process keep these effects in attention;

  • Note down your previous settings that you had done before initiating the reset, like wifi network name, security codes and other setting which you have customised.
  • Reliable internet connection is needed, when you will disconnect your modem, its connection will disrupt momentarily, that is why you need a backup connection ready to connect.
  • Verify the connection of your router with your devices, it must be connected through an ethernet cable and must be switched on.

Check these steps for restoring your Motorola 2247-N8

  • To reset your Motorola 2247-N8 you must access it through the web interface.
  • Use this IP address 192.168.1.254, enter it on the browser’s web address field, press the enter key.
  • Login page must appear if not then check the IP address again before submitting it. Enter the details of login when you are prompted for it.
  • Default login details can be used for this purpose if you have not changed them.
  • Press the submit or login button but before that verify the details is a required step.
  • If the login is successful then you will get to access the setup page of your modem, find “Advanced” or “utilities” option.
  • If you have had the firmware updated before this process then the setting can automatically be changed. You have to choose more situation possibility to discover the “restore factory defaults”.
  • When you will click on this option your device will show you a text that will contain a message that “it will remove your customised settings”. Note down your customised setting and proceed.
  • Press the button and be patient while the device initiating the process, you have to wait until you observe LED flash. When the process will finish your router will restart itself.
  • You will find that it has been started in its default setting, now you have to reconfigure it and alter the settings.
  • Follow the instructions that you did while accessing the web interface.
  • Setup all the primary setting including language, time, network connection choice.
  • You can check your manual guide and proceed with wifi settings, including security settings and other preferences.

Final Thoughts

If you will follow the step-by-step guidance provided in this blog then you can easily restore your Motorola 2247-N8 to factory default settings. In case the issue doesn’t resolve then contacting our technical support team will the appropriate decision for you. They are competent in their exertion and will not upset you.